The Ultimate SolutionTM in Detectable Warning Systems.

Access Tile is designed, tested

and manufactured in the U.S.A

Intelligent DesignTM Surface Applied

Specifications

Technical Drawings

Installation

ADA compliant dome geometry

the most innovative retrofit system

Access Tile's Surface Applied tile is engineered to successfully upgrade any existing surface to comply with Federally mandated detectable warning requirements.

ADA COMPLIANCE

  • 2.35" center-to-center, in-line dome spacing meets ADA Federal and State requirements
  • Truncated dome size and spacing compliant with ADA Federal and State requirements, 0.9" base and 0.45" top diameter
  • Fully complies with all ADA and OSHA requirements for surface height transitions to eliminate trip hazards
  • Consistent dome spacing when tiles are adjoined (side-by-side or end-to-end)
  • Wide in-line dome configuration facilitates a smooth rolling transition for strollers, wheelchairs and walkers

ASTM & UL TESTING

Tile geometry allows for consistent

dome spacing to be maintained

between adjoining tiles.

Perimeter of tile is designed

to meet ADA requirements for

surface height transition.

High density, diamond grip™ pyramid micro texture designed for exceptional slip resistance in wet and dry conditions.

Pre-formed fastener

locations enable error-free

installation. Color-matched

Tek™ Anchor is supplied with tile.

Textured surface to allow

optimum adhesive bond.

Audible detectability

technology engineered for

sound amplification

Maximized strength load

transfer design, bosses

located directly under

domes transfer loads

directly to substrate.

Adhesive location identified

on reverse side of tile for easy error-free installation

easy to install, easy to replace

designed for more environmentally-conscious

installation and replacement

  • Tensile Strength ASTM D 638
  • Flexural Strength ASTM D 790
  • Compressive Strength ASTM D 695
  • Accelerated Weathering ASTM G 155
  • Slip Resistance ASTM C 1028
  • Flame Spread Index ASTM E 84
  • Accelerated Aging (freeze thaw) ASTM D1037
  • Linear thermal Expansion ASTM D696-03
  • Tile Bond Strength ASTM C 1583

INTELLIGENT DESIGN FEATURES

  • Audible detectability technology engineered for sound amplification
  • Engineered load transfer design with bosses located directly under domes transfer loads directly to substrate
  • Bevelled perimeter edge meets ADA vertical displacement requirements
  • Strategically placed pre-formed fastener hole locations enhance installation integrity and provide easy installation
  • Tiles shipped with color-matched fasteners
  • Adhesive location identified on reverse side of tile for easy, error-free installation
  • Tactile Bond/Sealant is available through all our authorized distributors. The system is designed and tested to be both a structural adhesive and perimeter edge sealant
  • Interactive sizes – all tiles maintain pattern repeat when mounted side-to-side or top-to-bottom

Surface Applied Specifications

Specifications & Physical Characteristics

Product Sizes

Specifications

Part No.

Standard Sizes

Weight

ACC-S-1212-XX

1' X 1'

2lbs. (1 kg)

2′ X 2′

8 lbs. (4 kg)

ACC-S-2424-XX

2' X 3'

10 lbs. (5 kg)

ACC-S-2436-XX

2′ X 4′

13 lbs. (6 kg)

ACC-S-2448-XX

2' X 5'

16 lbs. (7 kg)

ACC-S-2460-XX

ACC-S-3648-XX

3′ X 4′

20 lbs. (9 kg)

ACC-S-3660-XX

3' X 5'

27 lbs. (12 kg)

ACC-S-3024-CRV

30" X 24" 15' Radius

8 lbs. (4 kg)

TekTM Anchor

 

ACC-S-ANCH-XX

Tactile Bond & Seal

 

TBS-010

Box Quantity

Anchors

16

4

16

12

16

8

16

8

16

10

16

12

16

15

16

8

50

 

12

 

Standard Colors

Physical Characteristics

ASTM Reference

Test Description

Test Results

ASTM D 695

Compressive Strength

26,900

ASTM D 790

Flexural Strength

31,300

ASTM D 570

Water Absorption

0.05%

ASTM C 1028

Slip Resistance

1.18 Dry / 0.88 wet

ASTM E 84

Flame Spread Index

<= 25

ASTM B 117

Salt Spray

No Change (300 hours)

ASTM 1308

Chemical Stain

No Effect

ASTM C 501

Abrasion Resistance

lw >500

ASTM G 155

Accelerated Weathering

Delta E <5 (2,000 hours)

ASTM D 638

Tensile Strength

12,800 psi

AASHTO-H20

Load Bearing at 10,410 lbs

No Cracking,Delamination orDeformation

ASTM C 1026

Freeze/Thaw/Heat

No Chipping, Cracking, or Peeling

ASTM D 1037

Accelerated Aging (Freeze/Thaw)

No Changing in Color, Gloss or Delamination

ASTM D 696-03

Linear Thermal Expansion

9.45×10-7 per ºFahrenheit

ASTM C 1583

Tile Bond Strength

Passed

RCRA-C

Non-Hazardous Classification

Non-Hazardous

Surface Applied Technical Drawings

Technical Drawings

Product Size

1' X1'

2' X5'

2' X4'

2' X2'

3' X4'

2' X3'

3' X5'

Radius

PDF

DWG

Surface Applied Installation

Installation

  1. Place the tile on the designated location and trace the perimeter with a thin permanent marker.
  2. Set the tile aside and using a 4" diamond cup grinder, scour the concrete within the marked location and in correspondence with the location requiring adhesive as indicated in backside of tile.
  3. Clear away the dust with a leaf blower then clean the back of the tile and the concrete with rag soaked in acetone.
  4. Apply adhesive to back of tile (as indicated on tile). The first bead should be applied thin, ½" from the perimeter edge and a second thicker bead applied 1" inside of the first.
  5. Set the tile true and square to the curb ramp and press down firmly.
  6. While stepping down on either side of preformed hole, drill down 3" into concrete slab using a hammer drill and the recommended ¼" diameter carbide drill bit.
  7. While still applying pressure, remove the dust and any adhesive that surfaces and carefully set the supplied color-matched Tek™ Anchor with a plastic-tipped hammer. Repeat steps 6 & 7 while w orking across the tile from one end until all pre-formed fastener locations are completed.
  8. Clean the perimeter of the tile and the immediately surrounding concrete with acetone making sure to remove any adhesive that has escaped from beneath the tile. Apply and smooth sealant around perimeter of tile.

Download Surface Applied submittal package

ACCESSTILETM  •  241 Main Street  Suite 100 • Buffalo, NY 14203 • Phone: 1-800-682-2525

AccessTile ©2015